E-mail:  snowsure@163.com

Tel:  0086 18863070778

ADD: Yuancheng, Changshan Town, Binzhou, Shandong, CHINA 

COPYRIGHT ©  Shandong Hongxin Machinery Co., Ltd.   鲁ICP备16046072号       国际网站建设:中企动力    淄博 外贸谷歌推广


Best Log debarker on sales tells what are the structure of Drum chipper?

Page view

Drum chipper is a traditional product. For many years, it has been widely used by domestic and foreign merchants for its superior performance, good quality and high cost performance. It is a special equipment for prepared wood chips, and it is suitable for all paper mills, particleboard mills, fiberboard mills, wood chip production bases, and wood chip export bases. Logs, small-diameter woods, etc. can be cut into good industrial wood chips with uniform length, flat cuts and uniform thickness, and can also cut branches, boards, etc. So do you know what its structure is? Let's follow the editor of Best Log debarker on sales to have a simple understanding!
Drum chipper is composed of machine body, knife roller, upper and lower feeding mechanism, hydraulic system, feeding device and other parts.
1. Machine body: It is welded by high-strength steel plate, which is the supporting foundation of the whole machine.
2. Knife roller: Two or three or four flying knives are installed on the knife stick, and the flying knives are fixed on the knife roller with specially made flying knife bolts through pressure blocks.

3. Hydraulic system: the oil pump is supplied to the cylinder, and the cover can be activated to facilitate the replacement of the blade; the upper feeding roller assembly can be lifted during maintenance to facilitate the adjustment of the gap between the flying knife and the bed knife and the disassembly and assembly of the comb plate.
4. Up and down feeding mechanism: It is composed of a feeding interface, upper and lower feeding rollers and a feeding gap adjustment mechanism. The wood entering from the feeding interface is pressed by the upper and lower feeding rollers and feeds to the cutting mechanism at a certain speed. Control the size of the cut wood chips; when processing thick wood, it is adjusted by the feed gap adjustment mechanism.
The above is an introduction by the editor of Best Log debarker on sales about the structure and composition of Drum chipper. I hope you can learn more through the introduction of the editor.