Do you know how to adjust the size of the customized Wood crusher?
Do you know how to adjust the size of the customized Wood crusher? Let’s take a look at it with the editor below!
Generally, the particle size of the jet mill can be adjusted by changing the feed rate of the customized Wood crusher. When the rate is reduced, finer particles can be produced. Since each particle has more energy to accelerate impact and fragmentation, this principle is of course easy to understand. Provide a larger power source and become an ambassador for increased impact crushing, and a finer grain size can also be obtained, which is the prerequisite for energy consumption.
Some products require a high level of crushing energy to be crushed. The customized Wood crusher can improve the crushing characteristics and increase the pressure, temperature, air flow control, etc. The shape factor will also increase the temperature and change the material. For all particle size control, the physical and chemical properties of the material must also be considered.
Properly adjust the output power of the customized Wood crusher diameter grinder. Some particles must be processed with low resonance, which requires multiple collisions. Therefore, when the resonance increases with each collision, the particle velocity is given a lower energy. On the other hand, in order to reduce particle realization, the particle speed needs to be increased.
In summary, it is a brief introduction to the knowledge about the crushing particle size of the customized Wood crusher.