E-mail:  snowsure@163.com

Tel:  0086 18863070778

ADD: Yuancheng, Changshan Town, Binzhou, Shandong, CHINA 

COPYRIGHT ©  Shandong Hongxin Machinery Co., Ltd.   鲁ICP备16046072号       国际网站建设:中企动力    淄博 外贸谷歌推广


A brief introduction to the relevant knowledge of the straw Wholesale Briquetting machine

Page view

The Straw Wholesale Briquetting machine is mainly used to process wastes such as straw, straw, peanut shells, corn cobs and other crop stalks. It can also be used as a special equipment for processing wastes such as branches, bark, and sawdust.

The straw Wholesale Briquetting machine can compress crop straw or crushed waste with a length (or silk) of less than 50 mm into a rod-shaped solid particle biofuel with a cross-sectional size of 30-40 mm and a length of 10-100 mm, briquetting The formed particles have large specific gravity and small volume, which is convenient for storage and transportation. It is a high-quality solid fuel with a calorific value of 3200-4500 kcal. It has the characteristics of flammability, low ash content and low cost. It can replace firewood, raw coal and other fuels. , Widely used in heating, living stoves, boilers, biomass power plants, etc. Cut or knead the straw or forage to be pressed to a length of less than 50mm and control the moisture content within the range of 10-25%. The material will be fed into the feed port by the feeding conveyor, and the main shaft will rotate to drive the pressing roller. After rotating and passing through the rotation of the pressure roller, the material is forced to be extruded from the mold hole in a block shape and dropped from the discharge port. After cooling back (the moisture content cannot exceed 14%), it is bagged and packaged.
In summary, it is a brief introduction to the relevant knowledge about Wholesale Briquetting machine.