COPYRIGHT ©  Shandong Hongxin Machinery Co., Ltd.   鲁ICP备16046072号       Poweredby:300.cn

HOME     ABOUT US     PRODUCT     NEWS    MESSAGES    CONTACT

E-mail:  snowsure@163.com

Tel:  0086 18863070778

ADD: Yuancheng, Changshan Town, Binzhou, Shandong, CHINA 

>
News
>
Vertical pellet mill
Customized vertical pellet mill small class explanation: preparation work before adjustment of pellet mill and experimental knowledge of air switch!
$info.title
Abstract:
Check whether the electricity, gas, and water in the production workshop are already in time and in a standby state.
What are the reasons for the abnormal appearance of customized vertical pellet mill pellets and how to improve them?
$info.title
Abstract:
The phenomenon that the pellets are bent with many cracks on one side is usually generated when the pellets leave the ring die. In production, when the cutter position is adjusted far from the surface of the ring die and the knife edge is blunt, the pellets are broken or torn by the cutter instead of being cut when they are extruded from the die hole. At this time, some pellets are bent. There are many cracks on one side and the other side. When this kind of granular material enters the cooler for cooling or transportation, it will often break from these cracks, resulting in too much granular powder produced.
Do you understand the maintenance knowledge of customized Vertical pellet mill?
$info.title
Abstract:
Check the parts regularly, once a month, check whether the movable parts of the worm wheel, worm, lubricating block, bolts, bearings, etc., rotate flexibly and wear conditions. If defects are found, they should be repaired in time and should not be used reluctantly.
Do you know what the product performance of the customized Vertical pellet mill is?
$info.title
Abstract:
The customized Vertical pellet mill is used to develop the wet powder into the required pellets, and it can also crush the dry bulk material into the required pellets.
The customized Vertical pellet mill tells you: What is the scope of use of the pellet mill?
$info.title
Abstract:
The granulator is mainly composed of feeding, mixing, granulating, transmission and lubrication systems, etc. It is widely used in the pharmaceutical, chemical, and food industries.
Page up
1
2