E-mail:  snowsure@163.com

Tel:  0086 18863070778

ADD: Yuancheng, Changshan Town, Binzhou, Shandong, CHINA 

COPYRIGHT ©  Shandong Hongxin Machinery Co., Ltd.   鲁ICP备16046072号       国际网站建设:中企动力    淄博 外贸谷歌推广


Solution to blockage of Intelligent pellet mill products affected by steam

Page view

In the production of compound feed, the safe and normal production of Intelligent pellet mill products is very important, but in actual production, due to the influence of steam, a layer of thick and hard material "crust" is easily formed between the ring die and the pressure roller. ", the pressure roller cannot push the material out of the die hole, which makes the ring die of Intelligent pellet mill products get stuck or slips, which is a common phenomenon that Intelligent pellet mill products are blocked.

Intelligent pellet mill products

The ideal production conditions in the production process of Intelligent pellet mill products are: suitable raw material moisture content, good steam quality and sufficient conditioning time. Proper use of dry saturated steam granulation can effectively improve the output of Intelligent pellet mill products and the quality of granulated materials. In order to ensure good pellet quality and high output, in addition to the normal operation of the transmission parts of Intelligent pellet mill products, the quality of dry saturated steam entering the regulator of Intelligent pellet mill products should also be guaranteed. Appropriate saturated steam can soften and lubricate the granulation process, increase productivity, reduce frictional heat energy, prolong the service life of the ring die, reduce power consumption, promote the gelatinization of starch, and the adhesion of fibers can increase the molding rate of granules and reduce powder , so that the appearance of the material is smooth and tidy, thereby improving product competitiveness. The steam quality is poor, so that the moisture of the material coming out of the conditioner is too high, and it is easy to cause blockage of the die hole, roller slippage, and blockage of the molding machine when it enters the granulation cavity.