Grinding machine refers to a grinding machine that uses a grinding tool coated or embedded with abrasives to grind the surface of a workpiece. It is mainly used to grind high-precision planes, inner and outer cylindrical surfaces, conical surfaces, spherical surfaces, threaded surfaces and other profiles in workpieces. So how much do you know about its operation knowledge? Follow the editor of Best Tub grinder on sales to have a simple understanding!

Operators need to be familiar with the general structure and performance of the equipment, and must not use the equipment beyond performance. The sum of parts and grinding volume must not exceed 90% of the volume of the hopper. After the power is turned on, dry running should be carried out smoothly without abnormal noise. Otherwise, it should be shut down for inspection. Before the workpiece is ground, the workpiece needs to be deoiled and decontaminated. During the processing, it is necessary to add abrasives and control the amount of water added in due time according to the grinding conditions of the workpiece. When the work is finished, cut off the power supply, clean the equipment, and do a good job of equipment maintenance. Safety operating procedures Before starting up, check the fastening screws and check whether the motor shaft and other rotations are flexible. When the equipment is in operation, it should stop immediately if an abnormality is found. Every 6 months, lithium-based grease should be added to the oil filling port of the vibration motor or the rotating shaft. After get off work, the power should be cut off.
In summary, the editor of Best Tub grinder on sales tells: a brief introduction to the operation knowledge of the grinder.