Reasons and treatment methods of oil leakage in the hydraulic cylinder of Briquetting machine For sale
Do you know the two causes of oil leakage in the hydraulic cylinder of Briquetting machine For sale and how to deal with it? The editor will show you a brief look.
1. When Briquetting machine For sale is found to be leaking from the outside of the hydraulic cylinder during operation, you should first understand the cause and treatment of the oil leak in the hydraulic cylinder of Briquetting machine For sale. In this case, we can solve it by replacing the sealing ring. However, if it is found that the bottom seal of the hydraulic cylinder of Briquetting machine For sale has been used for a long time, or the top cover is too tight during the installation process, the seal will be damaged. It is necessary to replace the sealing ring or replace the design instrument.
2. The oil inlet and outlet pipe joints of the Briquetting machine For sale hydraulic cylinder are not tight or broken causing the hydraulic cylinder to leak. At this time, it is necessary to replace the oil pipe and reinstall the fixed O-ring. It is also possible that the hydraulic cylinder or cylinder head malfunctions due to the quality of Briquetting machine For sale itself, and the hydraulic cylinder needs to be replaced. It is also possible that the operator has added too much hydraulic oil to the Briquetting machine For sale, causing the piston rod of the hydraulic cylinder to be strained. It is necessary to check whether the piston rod is repaired. If there is no new piston rod, it can be replaced directly. In addition, if the Briquetting machine For sale is running, if oil leakage is found in the hydraulic cylinder, if the unloading valve of the Briquetting machine For sale fails, it cannot play its due role, and the oil return cannot quickly return to the tank, and the hydraulic oil in the hydraulic cylinder leaks. , The unloading valve should be inspected and repaired in time. Moreover, due to the serious wear of the seal at the bottom of the piston rod, the hydraulic oil flows from one cylinder to the other when the Briquetting machine For sale is compressed, so that the equipment does not generate pressure. If we change the seal, we can solve the problem.
All in all, the role of hydraulic cylinders in Briquetting machine For sale is very great, ensuring that it does not leak oil, which can increase equipment pressure and avoid waste and pollution of hydraulic oil. Therefore, in daily work, we must do the daily maintenance and maintenance of Briquetting machine For sale.