Maintenance knowledge of customized single shaft hammer mill
If you don’t understand the machine maintenance knowledge of customized single shaft hammer mill, let’s take a look!
1. The shaft bears the full load of the negative machine, so good lubrication has a great relationship with the life of the bearing. It directly affects the service life and operation rate of the machine. Therefore, the injected lubricating oil needs to be clean and the seal needs to be good. Main oil injection places: rotating bearings, roll bearings, all gears, movable bearings, sliding planes.
2. The newly installed wheel tyres are prone to loosening and need frequent inspections.
3. Pay attention to whether all parts of the machine work normally.
4. Pay attention to check the degree of wear of easily worn parts, and pay attention to replacing worn parts at any time.
5. On the plane of the bottom frame of the movable device, dust and other objects should be removed to prevent the movable bearing from moving on the bottom frame when the machine encounters unbreakable materials, which may cause serious accidents.
6. If the bearing oil temperature rises, stop the machine immediately and check the cause to eliminate it.
7. If there is an impact sound when the rotating gear is running, stop and check it immediately and eliminate it.
In summary, it is a brief introduction to the maintenance of the customized single shaft hammer mill.