COPYRIGHT ©  Shandong Hongxin Machinery Co., Ltd.   鲁ICP备16046072号       Poweredby:300.cn

HOME     ABOUT US     PRODUCT     NEWS    MESSAGES    CONTACT

E-mail:  snowsure@163.com

Tel:  0086 18863070778

ADD: Yuancheng, Changshan Town, Binzhou, Shandong, CHINA 

>
NEWS_DETAILS

A brief introduction to the basics of Drum chipper from China manufacturer

Page view

Drum chipper from China manufacturer, the top of the rack is fixedly connected with a chip shell, the front plate and the rear plate are fixedly connected to the front and rear sides of the rack respectively, and one side of the top plate is connected to the front plate. It is rotatably connected with one side of the rear plate, the other side of the front plate and the rear plate is provided with a feeding piece, a driving gear is sleeved on the feeding motor and a driven gear is sleeved on the feeding roller shaft, and the driving gear is sleeved on the feeding roller. A transmission chain is sleeved between the gear and the driven gear, a chipping cavity on one side of the transfer roller shaft is provided between the front plate and the rear plate, and one side of the top of the top plate is provided with a chipping cavity. A chipping motor is provided and the output shaft of the chipping motor is connected to the chipping shaft through a transmission belt, the two ends of the chipping shaft respectively pass through the front plate and the rear plate, and the surface of the chipping shaft is fixedly sleeved with Chipping knife roller, the surface of the chipping knife roller is evenly provided with a plurality of blades, and the bottom of the frame is left with a discharge port.


The above is a brief introduction to the basic knowledge of Drum chipper from China manufacturer.